新澳门葡萄京8814-澳门新浦京8455com

Hello Welcome to the official website of Jiangsu Hongbo gas equipment Technology Co., Ltd!
Contact Us

Jiangsu Hongbo Gas Equipment Technology Co.,Ltd.
Mob(Wechat): 00-13817675951 (Iris Zhu)
Tel:0086-0512-65862279-0
Fax:0512-65790074
E-mail:iris-hongbo@foxmail.com
P.C.:215155
Add:No. 2 Fuxiang Road, Xianglu Industrial Park, Wangting Town, Suzhou City, Jiangsu Province, China.
R&D and Production Base: No. 2 Hongbo Road, Jinxing Industrial Park, Nanshen, Dongtai, Yancheng, Jiangsu

< >

Heatless adsorption dryer

Product parameter

Model Air handling capacity(Nm3/min) Diffuser model Interface size Outline size(mm) WeightKG)
L W H
HBHAD-4 4.5 KS-40 G1-1/2” 1100 550 1710 160
HBHAD-6 6.2 KS-40 G1-1/2” 1100 550 2080 350
HBHAD-8 8.5 KS-50 G2” 1300 650 2110 430
HBHAD-10 11 KS-50 G2” 1300 650 2110 460
HBHAD-13 13.5 KS-50 G2” 1350 700 2150 520
HBHAD-15 17 KS-65 DN65 1350 750 2270 720
HBHAD-20 22 KS-65 DN65 1400 750 2285 890
HBHAD-25 27 KS-80 DN80 1450 750 2545 950
HBHAD-30 32 KS-80 DN80 1450 775 2555 1320
HBHAD-40 42 KS-100 DN100 1700 925 2595 1550
HBHAD-50 50 KS-100 DN100 1800 950 2700 1800
HBHAD-60 65 KS-100 DN100 1850 975 2700 2250
HBHAD-80 85 KS-125 DN125 2100 1030 2810 2810
HBHAD-100 110 KS-150 DN150 2600 1200 3020 4150
HBHAD-130 140 KS-150 DN150 2700 1200 3030 4980
HBHAD-150 160 KS-200 DN200 2950 1400 3250 6250
HBHAD-180 185 KS-200 DN200 3250 1450 3450 6460
HBHAD-200 210 KS-200 DN200 3600 1600 3500 7280
HBHAD-230 240 KS-200 DN200 3700 1700 3600 8520
HBHAD-250 260 KS-200 DN200 4000 1800 3800 9360

Product principle introduction:
The heatless adsorption dryer uses the principle of pressure swing adsorption to make the dryer adsorb under the pressure of pipe network, then desorb under the switch to atmospheric pressure, and lead about 12-14% of the dry product gas from the outlet of the dryer to further purify and regenerate the desiccant. The two towers alternately carry out the above process to provide dry compressed air to the gas consumption point.
Standard technical parameters:
1. Rated air inlet temperature: ≤ 40 ℃
2. Rated working pressure: 0.6-1.0mpa
3. Ambient temperature: ≤ 45 ℃
4. Air dew point: - 40 ℃ (0.7MPa) (customized below - 60 ℃)
5. Regeneration gas consumption: 12-14%
6. Pressure loss: ≤ 0.02MPa
7. Oil content of intake air: < 0.1mg/m3
8. Installation method: indoor, without foundation, concrete ground leveling, reserved maintenance and operation space
9. Adsorbent: activated alumina, molecular sieve
10. Power supply: 220-1ph-50hz
11. Users can optionally configure customized products
Consult our technical service department for detailed technical parameters
Design features:
1. Short cycle adsorption cycle, isothermal operation, preservation of adsorption heat, good natural desorption effect
2. Full electronic programmable controller, friendly human-machine interface, automatic continuous display of double tower working condition
3. Regenerative orifice technology to effectively control regeneration flow
4. Accurate action, stable performance and simple operation
5. The inner wall of the cylinder shall be subject to professional antirust treatment, and shall not be rusted for 10 years
6. Stainless steel diffuser is corrosion-resistant, wear-resistant and durable
6. The stainless steel valve works stably, and its service life is up to 500000 times
7. Optimize the valve form to ensure the feasibility and convenience of on-site maintenance and replacement
8. Large flow muffler, lower back pressure, no condensation in muffler and exhaust channel
9. Frequency conversion with delayed adsorption technology is more energy-saving (optional)

Previous:Nothing
Next:Zero gas consumption heatless adsorption dryer
Contact

Add:No. 2 Fuxiang Road, Xianglu Industrial Park, Wangting Town, Suzhou City, Jiangsu Province, China.

E-mail: szhbjh@163.com

Tel:0512-65862279

Fax:0512-65790074

Copyright:Jiangsu Hongbo gas equipment Technology Co., Ltd. Technical support: shidewei Technology Su

新澳门葡萄京8814|澳门新浦京8455com

XML 地图 | Sitemap 地图